campionamento-personale-1

Lines

UNI EN 481:1994 - PERSONAL SAMPLING »

UNI EN 481:1994 – PERSONAL SAMPLING

campionamento-personaleThe reference standard for personal sampling is UNI EN 481:1994.
“Workplace atmospheres. Size fraction definitions for measurement of airborne particles”.
The system allows to sample on a personal level any type of substance (solid, liquid or volatile) differentiating the type of sensor.

LEGEND

  1. Personal sampler
  2. Filter holder
  3. Conical nozzle for breathable dusts
  4. IOM
  5. Cylindrical nozzle for asbestos fibers
  6. Cyclone for breathable dusts
  7. Vial holder for volatile organic compounds (VOCS)
  8. Accessories for instrument calibration

UNI EN 481:1994 - FIXED STATION »

UNI EN 481:1994 – FIXED STATION

potenza-fissa-linee-01The reference standard for indoor air sampling is UNI EN 481:1994.
“Workplace atmospheres. Size fraction definitions for measurement of airborne particles”.
The system allows to sample in an indoor confined area any type of substance (solid, liquid or volatile) differentiating the type of sensor.

LEGEND

  1. Life 1 One
  2. Filter holder
  3. Conical nozzle for breathable dusts
  4. Cylindrical nozzle for asbestos fibers
  5. Vial holder for volatile organic compounds (VOCS)
  6. Scrubbers for acids
  7. Telescopic stand
  8. Support with gripper for stand
Hci 00

UNI EN 12341:2014 - PARTICULATE MATTER »

UNI EN 12341:2014 – PARTICULATE MATTER

The reference standard for sampling of particulate matter is UNI EN 12341:2014.
“Ambient air – Reference gravimetric method for the determination of the mass concentration of suspended particulate matter PM10 o PM2,5 ”.

The system allows to sample particulate matter in an outdoor area.

UNI EN 13284-1:2003 - DUSTS (IN-STACK FILTRATION) »

UNI EN 13284-1:2003 – DUSTS (IN-STACK FILTRATION)

The reference standard for sampling of dusts in stacks is UNI EN 13284-1:2003.
“Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method.”
The system allows to sample in flues of any size and type (vertical/horizontal) the total dusts in the presence of little condensation.

LEGENDA

  1. Darcy
  2. Conical nozzle
  3. Filter holder
  4. Isocheck SRB
  5. Artick LT
  6. Lifetek 55 XP-R
Polveri 03

UNI EN 13284-1:2003 - DUSTS (OUT-STACK FILTRATION) »

UNI EN 13284-1:2003 – DUSTS (OUT-STACK FILTRATION)

The reference standard for sampling of dusts in stacks is UNI EN 13284-1:2003.
“Stationary source emissions. Determination of low range mass concentration of dust. Manual gravimetric method.”
The system allows to sample in flues of any size and type (vertical/horizontal) the total dusts in the presence of a high amount of condensation.

LEGEND

  1. Darcy
  2. Thermo DL
  3. Filter holder
  4. Isocheck TSB
  5. Artik XP
  6. Lifetek 55 XP-R
Polveri 2

UNI EN 14385:2004 - METALS »

UNI EN 14385:2004 – METALS

The reference standard for sampling of metals in stacks is UNI EN 14385:2004.
“Stationary source emissions. Determination of the total emission of As, Cd, Cr, Co, Cu, Mn, Ni, Pb, Sb, Tl and V ”.
The system allows to sample heavy metals in flues of any size and type (vertical/horizontal).

LEGENDA

  1. X1-Probe
  2. Absorber for Silica Gel
  3. Impinger
  4. X1- Apis
Polveri 1 01
Polveri 03

UNI EN 1911:2010 - HCI »

UNI EN 1911:2010 – HCI

The reference standard for sampling of acids in stacks is UNI EN 1911:2010.
“Stationary source emissions. Determination of mass concentration of gaseous chlorides expressed as HCl. Standard reference method”.
Manual system for the determination of HCl in emission with a titanium probe (also available with glass probe).

LEGEND

  1. Thermo DL heated probe
  2. Isocheck SRB
  3. Filter holder
  4. Absorber for Silica Gel
  5. Lifetek 55 XP-R
  6. Impinger
  7. Life 1 One
Hci 00
Hci 01

UNI EN 1948-1:2006 - DIOXINS, FURANS, IPA »

UNI EN 1948-1:2006 – DIOXINS, FURANS, IPA

The reference standard for sampling of micropollutants in stacks UNI EN 1948-1:2006.
“Stationary source emissions. Determination of the mass concentration of PCDDs/PCDFs and dioxin-like PCBs. Part 1: Sampling of PCDDs/PCDFs”.
The system allows to sample micro-pollutants (IPA, dioxins, furans) in flues of any size and type (vertical/horizontal).

LEGEND

  1. X1-Probe
  2. Absorber for Silica Gel
  3. X1 – Chiller
  4. X1- Apis
Hci 00
Hci 01

D.M. 25 AGO 2000 - SOx NOx HCl HF »

D.M. 25 AGO 2000 – SOx NOx HCl HF

The reference standard for sampling sulphur and nitrogen oxides as well as inorganic compounds of chlorine and fluorine is the D.M. 25 August 2000 (Istisan report 98/2).
The system allows to sample SOx, NOx, HCl and HF in conveyed gas flues.

LEGEND

  1. Gas probe
  2. Artik LT
  3. Absorber for Silica Gel
  4. Life 1 One
Hci 00
Hci 01

UNI EN 13649:2002 - VOLATILE ORGANIC COMPOUNDS »

UNI EN 13649:2002 – VOLATILE ORGANIC COMPOUNDS

The reference standard for sampling sulphur and nitrogen oxides as well as inorganic compounds of chlorine and fluorine is the D.M. 25 August 2000 (Istisan report 98/2).
The system allows to sample SOx, NOx, Hcl and HF in conveyed gas flues.

LEGEND

  1. Gas probe
  2. Absorber for Silica Gel
  3. Life Duo DIL
  4. Life 1 One
Hci 00
Hci 01

ANALYSIS OF COMBUSTION PROCESSES »

ANALYSIS OF COMBUSTION PROCESSES

The system allows to detect using electrochemical cell and infrared sensors, the following parameters:
O2, CO, CO2, NO, NO2, SO2, CXHX .

LEGEND

  1. Emicheck
Hci 00
Category: